Strata Lite App Reviews

We transfer money over €4 billion every month. We enable individual and business accounts to save 4 million Euros on bank transfer fees. Want to send free money abroad or transfer money abroad for free? Free international money transfer!

Great app. Solid functionality, and works like a charm; would love to have cut and fade functionality in the lite version; those are the only extra functions we would need to take this to the next level: that being said, it is understandable that this would be in the more expensive version

Works.. The only bummer is it doesn't fade between sources...

Doesn't work. Wasted $10 bucks. Bought it, opened it up and nothing. It looks good but I put in the IP address which is the only setting it has and nothing. No instructions, no alternate settings, no support. Don't waste your money.

What a waste. Doesn't work!

DO NOT DOWNLOAD. Bummed. Does not work at all. Waste of 10 dollars.

Perfect. It does exactly what a remote does. It's a little confusing at first if your used to controlling it manually but it only takes a couple minutes to figure out.

Garbage App. This app did absolutely nothing. Not sure why it’s $9.99

CRASHING. App continually crashes when connected to the network my ATEM switcher is on. If I’m off the network, it stays open. Help!

Solid App. The app provides solid, reliable control of the Blackmagic Design ATEM line of switchers. The iPad interface is great and reminds one of the BMD's own software control; however, the iPhone interface lacks control of the preview bus and is not optimized for the iPhone 5 screen, which is extremely disappointing. Finally, anyone needing anything besides basic control or who owns the 1 M/E or 2 M/E should spend the extra money for the Pro version of the app before buying this one. Please note that there is no upgrade route from the Lite version to the Pro version. Although, strangely enough, the Pro version does not have the iPhone interface included for convenience. The free version of this app, Strata View, makes for a great tally system. Though, I have heard of a 5 device connection limit since they use UDP, but I haven't tested this yet.

Atem remote control.. Works great.! With covid thing. We couldnt have more than one person in our small sound booth at our venue. Set up cameras on floor and remote monitor. Does the job!

Super Source. Please add “Ssrc” Super Source to the selectable sources. It is available on the IPad interface and there is room to add it to this version for the IPhone. It would be very helpful!

Trash app, trash dev, trash support. Money grab.. You know when you hover over that buy button thinking you know this is a rip-off but hope it’ll at least work enough to be worth it in 1 year or so? Yeah, that’s this app. But still not worth it 1 year down the line. Absolutely trash - this app is so poorly designed I’m amazed Apple allowed it. 1: the app will refresh its GUI constantly while it tries to reconnect to the ATEM device. This leads to you tapping the same button repeatedly like a slot machine hoping you caught it while it didn’t disable the button and actually sends the command. 2: dev has no idea about WiFi, how it works, or what would fix it. To quote them, “we saw Apple airport behaving better”. Right, makes sense, a 2.4GHz router from a decade ago. Then in the same breath the dev blames your router and BlackMagic for the intermittent connectivity this app is barely handling. I’m 5 feet away from my router, and the laptop using Software Control uses the same router, same WiFi, same protocol that BM wrote, yet magically works. It must be because I don’t have a decade old Airport. 3: emailed the dev 6 business days ago, zero replies. Not even a courtesy “thanks for emailing I’m swamped, I’ll look into it”. Silence. 4. The app costs WAY TOO MUCH for the trash quality and use you get out of it. Dev should dial it back to free. Then at least I and many others won’t be demanding the dev fix the app to work as advertised. As it stands right now I purchased a product that was falsely advertised, and it has no support. I was cheated, scammed.

Works great. Just didn't know they gna charge u 10 a month to use it

Did not work. Wasted time trying to connect to my ATEM MINI poor instruction to no instructions on how to connect step by step for a beginner.

Works great. It took me some time to figure out how to get this to run with my black magic device, but once we created our private wifi network, it has done the job for us. Students use this app to control our video switcher at school. It is easy to use and effective. It saves us from having to lug around another computer when we are mobile.

LINKSYS ROUTER. I am thoroughly disappointed that it was not until AFTER I purchased Strata Lite that I found out it does not work with a LINKSYS Router! I think I deserve a refund!

Doesn't Work. Doesn't Work!

Crashes every time I open it.. iPhone 12 Pro Max

w**** my money. unuseable app ever in tne universe. crashed every single time I tried to connect. the only question is how can i get my money back?

Works but lacking basic features e.g. cut. So this app is very basic as the picture suggest. Touch a button and that source goes live. Not useful if you’ve set up two sources where one uses a key (eg PIP or green screen) and you want to go between the two. Would love a simple CUT or AUTO button.

Great Idea...poorly implemented.. This is an app Blackmagic should have made. Great idea, but app crashes WAY TOO OFTEN. An app shouldn’t crash if it has trouble connecting with WiFi, and the developer gives the same excuse...”it’s the routers fault.” I don’t blame the router when Safari crashes. There are a lot of bugs to work out of this app before it’s useful in a “real” switching environment. I’ll give it 2 stars for the creativity of attempting something that has real potential to be useful.

Crashes way too often - not suitable for mission critical work. I'm torn because the app works great - when it's not crashing. Sometimes it will remain stable for the length of a shooting session, other times it'll lock up and/or crash frequently. Another annoyance is that settings aren't saved between sessions. If I don't specifically pull up the settings panel on the first boot it'll ignore the "do not sleep" setting even though it's set to on in my configuration. Hopefully they can work the kinks out.

Works great!. If you configure your settings correctly this wonder app can be a life saver for single user/presenters. Would be perfect if it integrated automation allowing for pre programmed selection sequence of camera and time. I.e switch based on user defined order and specified time for each camera.

Updates?. This is one of my favorite apps to use but lately, it has been freezing up on me. Will you have any updates soon?

Great App. Love this app for control of my ATEM switchers!

Did you know that you can earn 25 USD from our site just by registering? Get $25 for free by joining Payoneer!

Great app. An excellent way to control the ATEM 1 switcher we use. Would be nice to be able to control Keys without having to buy the $50 app as we don't need the aux, volume or 2nd ME control.

No good with iOS 7. This app is not good at all. Do not buy if you are running iOS 7. You cannot select the mixer address, and when I try to save settings it crashes. Poor app.

Imagine you at your best. All the time. Picture yourself at your sharpest and most productive. Your most alert and focused. Your most lucid, creative and confident. At work. At play. In every area of your life. Add Mind Lab Pro® v4.0 to your daily routine and uncap your true potential. Buy Now!

Instable. I tried and loose often times the connection and I have to close program and reload to reconnect! I work with Ipad 64GB IOS 7 A l’essaie, je perd souvent la connexion et je dois fermer et ouvrir a nouveau pour reconnecter! Cependant, si ce problème se corrige, l’outil en vaut le prix. If the company fix this problem, this tool work great.

Not sure what to say.. I have ATEM studio HD unit. Did all the wireless settings right. Yet, neither on my iPad or iPhone the app does not even see the unit. I have checked all the settings in the machine and the apps and they all match properly. Such a frustration to make this app working. Well, in the settings page of the app they encourage you to get a pro version which is way more expensive. Now, after such a hassle to connect my devices with the lite version I don’t know if I should try the pro! Any suggestions? Thank you.

Works but crashes constantly. While I get that this isn’t the “pro” version, I’m a developer so I cannot understand why this continues to crash for people and there has been nothing done about it. It’s a 12$ app that’s only purpose is to use a predefined network based API with some graphical buttons. Yes, this app works but waiting for 10 mins then trying to switch camera feeds results in a crash. You then need to open the app, wait (only to realize it isn’t auto connecting as it should), open the settings, do nothing except for click save, then close the settings. And before people ask about my network, it’s a dedicated network that has one wired connection to the ATEM and a single wireless connection to the iPad. No internet connectivity and is less than 5' from both devices. I am seriously considering building my own tool for this and providing it for free if a solution isn’t found soon.

Adsterra is the most preferred ad network for those looking for an alternative to AdSense. Adsterra is the ideal choice for new sites with low daily traffic. In order to advertise on the site in Adsterra, like other ad networks, a certain traffic limit, domain age, etc. is required. There are no strict rules. Sign up!