RoomScan Pro LiDAR floor plans App Reviews

We transfer money over €4 billion every month. We enable individual and business accounts to save 4 million Euros on bank transfer fees. Want to send free money abroad or transfer money abroad for free? Free international money transfer!

Misleading. The application states that you can make a 3D scan of a project, but fails to advertise that you need to buy a subscription plan in order to use this feature. Misleading the customer after being featured in a keynote is a sure fire way to lose customers.

Best Lidar App. I have tried several other apps but this one generates the best floor plan and is very easy to use. But I would like to opt out of the spinning wheel selection method, which is very hard to read.

Makes it so easy and fast. Did my entire house in less than 30 mins on my first try, both floors. This app was so fun to use and pretty easy to learn. I love that I can go back to add sinks and other things afterwards. I wish it could map vaulted ceilings, some of mine slope and have lights at different levels. Oh, and live support was awesome! I couldn’t figure out how to rotate one of the floors that I scanned and they helped me figure it out super fast. So excited to use this for our new house too! Awesome app!

LiDAR does not work. Unfortunately, you need to be “lucky” to get a good scan and any other type of results with this app. A pity..., very frustrating. Needs lots of work and a lot more accuracy.

Need pinpoint accuracy everywhere or else. I made three attempts to map out our family room, and each time the dimensions were completely wrong. The app did not come close to recognizing corners, the floor height was completely off - by almost 3 feet in some cases - it doesn’t recognize half walls, etc. It almost seems like rooms have to be empty to this app to work. Too bad, so much potential - poor execution. And an absolute battery drain too!

Horrible user interface.. Extremely hard to use

Works wonderfully. While initially buggy on the iPhone 12 pro, the new release from developers fixed it and it works splendidly.

Streamlined my work flow. Love this app! Especially it’s ability to export ESX files for Xactimate! It’s quicker than Xactimate Mobile and is usually pretty spot on within less than a 1/4”. Sometimes a little tweaking is needed but that’s understandable. Regardless of what app you’re using, ALWAYS take some realtime measurements to compare. This app has been a huge time saver!

My Goto Tool (but it's not perfect). This is one of three similar tools I use to build floor plans on the fly with the camera and LIDAR features on my iPhone. The other two are MagicPlan and Canvas. MagicPlan is better at editing drawings after a scan is done. Canvas allows you to upload a scan of one or more rooms and have a human assist with very high quality PDF, 2D drawing, 3D drawings and BIM (REVIT) files. The quality of the results with RoomScan LIDAR is lower BUT I use it the most. And that is because on some sites, like I am on this week, there are lots of construction materials, boxed appliances and other things that make it impossible to see the floor/wall connection. RoomScan still works fine, as long as you can see any part of a wall ... the other two, not so good. Also RoomScan makes it possible to make a 'good enough' floor plan with doors, windows and some auto symbol recognition very quickly. I was able to complete and forward a drawing set for two floors with wall and area measurements in PDF and Autocad to an HVAC engineer in about 20 minutes.

Needs Work. Good idea but needs some work to overcome functionality limitations and bugs. How can you adjust the floor? No idea. How can you add small wall out toppings? No idea. What happens when you finish scanning a room and the entire scan has shifted? No idea. This application also has issues with crashes. It’s honestly less work to get out a ruler & paper to take measurements. Many fixes are needed but this application has potential!

Terrible app. The 10 tips look simple enough- but in practice this is a fussy app that makes no sense. Very frustrating.

Just screenshot. No point in buying it. Just screenshot the room you want. Uninstall and reinstall.

Creeps crashing. Got a new iPhone pro with LiDAR, tried to scan a room in the house...keeps crashing every time I try to save the scan. Maybe there’s a limit? The room is decent size, but, it doesn’t give me the option to save and resume.

This is the LIDAR app you need to get!!. I was one of the beta testers for this app, it was already amazing and the improvements in version 2 just make it so much more unbelievably mind blowing, I can’t say it any better than to simply tell you “buy this app!” When you want to show off to your friends what LIDAR is and why it is so cool, RoomScan LIDAR is the app you will use to show them.

Pretty good, difficulty with open floor plan. So far I’m liking it! I need more practice, but a few difficulties I’m having: With an open floor plan it seems it wants me to scan the entire area, like when I try to mark an opening it won’t let me and I have to keep scanning the rest of the floor of the house. We have cabinets and counters and it seems to have trouble getting measurements to the back splash/ just measures the cabinets as the wall. After I finish a scan and am in the marker mode, I can’t figure out how to modify the base plan/ original scan. There’s a couple areas where the floor plan shows a diagonal angle where there isn’t. Marking off a stair case as a wall is difficult, I needed to crouch down to the bottom step to do it. For simpler rooms it’s great, open floor plan it’s a bit tough, but maybe I just need practice

Very useful and well done but it for sure needs some improvements. The app is amazing, but it has some bugs, its real good for only one room but when you scan more than one or two it gets confuse and sometimes freezes

It depends. Probably works pretty good in some scenarios. After multiple attempts and reading & watching instructions, it just gave useless results. I think it will work if the rooms are mostly empty. In my case it never could get floor, corners and walls right. The scan looked cool, but was not useful for drawing or measurements.

No good for Xactimate. I subscribed to this exclusivily for xactimate use as it exports in ESX. Wall thinkness seems to default to 1/4" and cannot be changed that I can find. As a result wall thinkness in X8 is 1/4" and if you try and change that X8 prevents it due to overlap of area or block requiring a resize or move. The next problem is the corners. They will be out by 1 or 2 degrees and the corner cannot be changed in X8. If it's a simple square room both the wall corner and thickness can be changed/corrected, but who needs a simple sq room? It seems once the room deviates from a sq you lose the abilty to correct it. It scans great, it's just the result for X8 is near worthless.

No mesh export. Why’s there no option to export the mesh?! Apart from that very fast and accurate, just need to sort the exports

Canceling subscription after 1 hour. Crashes. No support. Such a shame. I like the interface but useless since it keeps crashing. Their workaround doesn’t help.

Sketchy at best. Not an accurate tool at all. App crashes regularly. Measuring a room with different ceiling heights and posts is impossible.

Love this app!. I do Remodeling here in Houston TX and for the recent freeze this app really came in handy when doing sketches for insurance work. I love the constant updates and the great price it’s at right now for extra features. I would like for the Bluetooth laser feature to be shown in a “Tips” video. Not sure if my laser is not compatible but it’s never worked for me. Overall a great and accurate app even without a Bluetooth laser. Another feature I would like to see added is a statistics tab where I can see Floor perimeter, ceiling perimeter, walls squared feet, ceiling squared feet, or walls and ceiling squared feet. Devs keep doing your thing because this app is awesome!

Disappointing. I had high hopes for this on my x. It crashed constantly and scans produced unreasonable shapes. The editor is so terrible that I just ended up trying to rescan each time rather than battle the editor. I got the 12 pro max and hoped Lidar would help. Less crashes but it still produces absurd shapes when scanning my rooms. Z shaped walls, x shapes walls. I thought maybe just delete a crazy erroneous wall to remove the app’s crisscross walls in my room? Nah. That’s not an option I can easily find. Ok, make one wall zero length. That doesn’t work. Developers: you need to build in some “reasonable” checks into your scan. Sure, the math might check out but the shape you produced just isn’t reasonable. In addition to 5-6 walls at 90 degrees, who has six more walls in their room that are not 90 degree angles? Who has z shaped walls in the middle of the room? Nobody using this app. What about x shaped walls in the middle of the room. Nobody. Either add easy options to delete or repair absurd scan points/walls or build in something that checks for whether or not the shape is reasonable.

Has To Be Easier - SCAN 360 ROOM…DONE!. Just too cumbersome, errors at every turn when clicking-Bricks. When I view I want a 360 view of the room and able to “look up” to ceiling fan. It only allows looking down at the floor. I’ll be canceling this and deleting the app real soon. A couple more tests. So far, total FAIL!

Blank screen. Nothing but a blank screen, asking me to touch walls. Doesn’t ask to access camera, checked settings but camera is never requested by app. Blank screen

WORTH IT. I typically don’t leave reviews because I don’t really care enough to leave a review, but this, this is awesome and very very helpful if you’re and adjuster/inspector for the insurance. It will give you a very detailed diagram of the light fixtures, sofas, cabinets, doors, and etc. highly recommend!!

It doesn’t work. It worked for about five minutes. I could not measure a room. It stopped working and all I get now is a nag screen.

Not great. I paid for the old version of this app and it never really worked right and this seems to be a variation of the same. I scanned one small room and it was ok, but then trying to do a larger room led to crashing and tracking glitches. It can easily get thrown off by anything moving within the space which then leads to large errors that require rescanning. Ultimately a laser tape measure will get you better results more quickly. Don’t waste your time or your money.

Problems with Free Trial. Started 7 day free trial after scanning three rooms with intention of subscribing, but got an error when trying to create a new room. I get a dialog stating “Problem with App Store” when I tap Start Scan.

Are you kidding me?. Pay monthly to use your software? No way. (UPDATE after answer from developer) I understand your situation about money to develop, it's not easy. I no longer wish for your failure, I wish for your success, but keep in mind that for this to happen you will need to change this form of payment. I talked with a group of people on whatsapp, everyone found the same thing and even in my group there are several iphone app developers.

Most accurate LIDAR floor plan generator. I’ve tried a half dozen room scanners with my iPhone 12 Pro, I have to admit that this one is the most accurate. Where other apps have you mark off exact floor corners, which may be blocked off or under counters, this one relies on only marking off the walls. This input generates perfect accurate angles, distances, and proportions. Shelves, kitchen and bathroom counters, cabinets, nothing stands in this thing’s way. The only thing is, many features are locked behind a monthly paywall. It gives you about 3 seconds of walk around in the 3d scan before yoinking you back and demanding $4 a month. Maybe it’s worth the price, I don’t know, I don’t absolutely need it because I’m just doing basic measurement. If you’re a professional, you probably have something much much better. Who is this marketed for? Again, not my problem. One star off for ridiculous pricing model. I know devs regularly respond to reviews, my suggestion is finding a better way to build a dedicated, enthusiastic user base and to let them help make the app a success.

Great app, But!. Has great features and is pretty accurate BUT once you suspend your subscription then you no longer have access to a lot of the features and you can’t share or edit any scans you’ve done while on the subscription.

Very accurate. The scanning features are impressive and very accurate. When I initially installed the app, the “Edit Shape” feature wasn’t working (move wall and split wall did nothing) but it seems to have been fixed now.

It’s meh. This app is great for getting a rough outline of a floor plan. But you end up having to go back and remeasure everything because a lot of the times I’m noticing that rooms are anywhere from 6 inches to 2 feet off. So then it negates speeding up the process because I still have to go back and read measure everything to confirm. I tried it on large homes and small homes. It’s better in small spaces and really struggles with open floorplans. Look forward to updates in the future. I wish it talked directly to Xactimate.

Disables iOS functionality. This app tries to disable screenshots by putting an overlay on screen and stops working completely after you take a screenshot until you buy a recurring subscription. Apple should have rejected the app for that.

Disappointing crashes, misses, & usability. If you want to scan one square room and get the dimensions, this app will do great. Use the Apple RoomPlan scanning (kudos to the dev for leveraging it so quickly) and away you go! If you have more than one room, budget some time and get ready for a frustrating experience. The app would identify and show scanned nooks, outdents, doors, openings, etc while scanning but the finished scan would loose much of this. I played the lottery by scanning rooms several times to try to land on a version that got most items. You can add doors afterwards, but then you’re back to measuring with tape…what’s the point of the app then? If the room is has too many transitions, surprise!! —the app crashes (iPad Pro 2021). The other big weakness was joining rooms. It would routinely join rooms in distorted locations, and once it’s joined it’s not possible (or at a minimum highly unintuitive to move them). I cancelled my trial and deleted the app. Hopefully something more stable and intuitive is on the market soon.

Everything behind a paywall. The app is pretty easy to use but nothing can be viewed unless you pay. How do I know if I want to pay for your app if you don’t let me look at anything? It should be pay upfront instead of looking free and then forcing you to pay to do anything.

Unusable due to crashes. Open app, select model, continue scanning, count to 5, BOOM!

Mind blowing accuracy. Having been a user of the previous version i was exited to put the new Lidar version to work in our real estate projects. It does not disappoint and is amazing accurate as i confirmed each measurement with a laser measure during my initial tests. Lidar support makes an already great product even better and has already saved us a huge amount of time onsite. Roomscan Lidar is our new standard for quickly and easily capturing robust, highly accurate floor plans. Give it a try you will be amazed.

Decent App. This app has decent functionality. However, I do run into some bugs that tend to be rather frustrating while using Apple products (iPhone, iPad). One is when I go to Start Scan, and it doesn’t give me a chance to scan the room. Instead it tells me it did not find a complete ring of walls. The 2nd is when I tap “Draw Room Manually” and it still starts the scan anyway. The 3rd is when I am currently editing a room, I hit “Done”, tap on a different room (where I can move it around), tap “Edit [room name]”, and then it returns me to the main overview of that property. I can do it a 2nd time with success, but it is rather annoying.

Does not work. Could not get it to accurately scan a simple 4ft x 6ft half bath. After a few failed attempts it required a subscription. Hard pass.

Poor instructions. This looks like a really great app, and it probably is, but I can’t figure out how to work it. Of course it works differently on both my iPad and my iPhone. On the iPhone, I can’t figure out how to find the screen that has a little rotator that selects doors or windows. Actually, I can’t find it on the iPad either. It’s very easy to scan a room with my iPad just clicking on the walls, but I still don’t know how to add those doors and windows! I wish there was a tutorial. The little 10 suggestions at the beginning are OK but they show people adding doors but don’t say how to get to the screen. Very frustrating especially when you’re paying for it

Works well if plumb and true. Getting my feet under me with the app, and so far most of my issues have been due to me. It works well on flat walls with level floors and ceilings. Issues: Tried it in an A-Frame with a 18:12 pitch on the side walls. It will not recognize the tilted plane as a plane, and let it be a wall, floor, or ceiling. Also, irregular hand layed rough stone walls, there are some hand layed walls in some buildings which the app won’t resolve into a plane, and recognize as walls.

Doesn’t really work. Nice attempt but doesn’t actually create models exportable into a usable format. I quickly unsubscribed.

Free version keeps pestering you. Normally in a free app with a $4 per month IAP it pops up the page to try to sell you once. Instead, when trying to interact with the spinnable 3D model of my room it keeps popping up every 5 seconds - basically worthless.

Maybe. You should require payment prior to downloading it. I opened it and then had a meeting so I never used it. When I opened it again it wanted me to sign up for a free trial to try it. I don’t like free trials because I forget to cancel them. I was really interested in this because I am a contractor but I would like to actually be able to try it before I sign up.

Crashes all the time. I am deducting a star. I opened the app to try it out, and it just crashed all the time. Over and over. I closed it, wrote my below review and went on to do other things. I then went to a different site to see if maybe a simpler or more basic room would scan, and now it wants me to sign up for a subscription so I can’t even experiment and see if changing any settings helps. Maybe they should get it to not crash before they’re asking people to sign up for subscriptions. Poor user experience. My Original 3 star review: App has great potential, but it won’t make it through a single room without crashing. It just crashes all the time. I read other details about closing all other apps for memory savings. I closed everything on my phone and hard-rebooted. Still crashes all the time. This is on an iPhone 13 Pro Max. The most capable phone they currently make so I am not sure what else I could do. Running the current version of iOS as of this review:15.3.1

Crashes on every scan. I expected the iPhone 12 pro to be able to use this program, but it seems like no matter what I do, the app crashes on ever scan. Only useful for iPad pro

Great app, does have crash issues though. First off this app does an amazing job of building floor plans. Super intuitive and the 10 step guide was really helpful. The biggest issues I ran into were the crashes that occurred while trying to complete a scan and losing everything. The crashes seem related to running out of memory, so I recommend force closing all apps and restarting the phone as that worked for me. It would be nice if this tip was included in the app, but even better if the app could save a partial scan so that I don’t have to start from scratch after a crash. For example all of my crashes occurred after completing the wall scan and adding doors, openings and windows. If the initial scan was saved it would have been much easier to recover.

Needs improvements. This is a great tool to have for measuring homes as a Realtor when I need an approximate floorplan and sq footage size. However, it has issues with crashing, finding my bluetooth signal, and it runs my batter down fast and keeps my phone hot during use. Another issue is not being able to add certain things after the fact without being in the room like the toilets and tubs. Having more selections like fireplaces and other items would be helpful. Maybe these features are somewhere in there, but I have yet to be able to find them.

Did you know that you can earn 25 USD from our site just by registering? Get $25 for free by joining Payoneer!

User Unfriendly. Not enough tuition videos.

Shocking bugs and woeful customer service. Damn shame.. I subscribed for the paid version of RoomScan LIDAR and tried using it a scan a large building with 7 interconnected rooms. After many rescans due to bugs and bad design, I contacted the RoomScan team to provide feedback or perhaps even learn if I there were workarounds for my issues. I am a UX designer so appreciate the processes through which users approach applications and what useful feedback looks like. While providing this feedback, I was met with confusion, misunderstanding and disbelief. I explained the steps through which these bugs occurred and what improvements would look like from a UX perspective. Rather than listen and take this feedback on board, they asked me to screen share and replicate one of the issues I had previously mentioned. This was infuriating. I had already explained that the issue cost me about 15-30 minutes multiple times that day and was inconsistent, so I was not going to spend my time trying to reproduce this for them when I had explained the cause. They have since blocked me on their chat application (intercom through the app). I cannot imagine a worse strategy for a small company, than to alienate knowledgeable users volunteering feedback after they have already suffered the frustration of the app’s problems. Incredibly poor form.

A great idea, terribly executed.. Great in theory, but in practise I found this app to be a clunky, unintuitive load of junk. It made the process far more time consuming than it would have been if I’d drawn up plans and measured everything by hand. Not worth the money.

Aweful. Scanning one room is ok but adding more rooms is woefully out of scale. Adding doors and windows is incredibly painful. Can’t get much further in testing without committing to a subscription. Has potential but needs to automate door and window insertions.

Great app, lots of potential. Great little app and very accurate, most of the time anyway. I tested it many times in different places and I’m quite impressed. I have looked at many LiDAR apps for room planning and this one, although a little clunky makes light work of a lot of intricate rooms, and the overall idea is much better than a lot of the others. The roomscan feature uses apples apk to form rooms and detect objects. That in itself is very accurate. However, one suggestion would be to allow for full house scans without the need for going room to room. This isn’t possible at present as the app doesn’t add additional walls, or fails to create full plan on a single scan. Some apps can do this

Shocking. I have tried to measure up a number of houses using both methods of this app and neither have worked properly. If it is user error then it needs refining and better instructions. Rooms were mirrored, doorways missed and there needs to be an undo button something goes wrong. And it needs to easily show dimensions in mm for people like me who need this level of detail. Unfortunately it’s back to tape measure and grid paper.

Waste of money. I scan a house and the measurements are incorrect and then the app won’t let me save the file either in jpeg or png which I can’t deliver to a client. No tech support. Waste of money and time

Seems Okay but free version is limiting. Scanned two rooms completely missing one door and seemed to have an issue with another door that is a 6 folding door set with windows above it. Can’t scan more rooms without paying so I’m deleting and looking else where.

Works great. Very easy to use

Imagine you at your best. All the time. Picture yourself at your sharpest and most productive. Your most alert and focused. Your most lucid, creative and confident. At work. At play. In every area of your life. Add Mind Lab Pro® v4.0 to your daily routine and uncap your true potential. Buy Now!

This app actually works. I’ve used this app for my new house and it worked pretty well for me. It took me less than an hour to scan a 4 bedroom house. Room-joining feature is pretty intuitive. My only complaint is how editing is a bit clunky - like you can’t rotate items without accidentally re-sizing them.

Fast and easy to use. This works really well! The lidar is great, much better than AR at finding walls. I was able to make floor plans very easily with this app, even in rooms full furniture. You do need to pay to properly finish a floorplan, but it’s not expensive, and the free version lets you test the accuracy before signing up.

Good but could be better. When will be able to georeference the model in a coordinated system? When I export the model it was in a local system. Another great add could be connect the floor. It’s easy to connect one room to the other but not all the floors of a house. When I used 2D to 3D the floors were wrongly connected!

Do not waste your time. Terrible app, crashes all the time and on top of that prompts you at the end of scan to start a subscription to be able to move forward. Scam practices right there, you should come forward at the beginning before making me waste my time.

Very basic functionality. Crippled behind a pay wall.. The free base software is incredibly limited and the monthly fee is high for someone only scanning and sharing a couple rental properties. I’d gladly pay a fixed price, even $100, for a reasonable product but monthly? Forget it. I suggest skipping this app and using canvas instead since the free version allows uploading and sharing. If they sold a “lifetime” pass, or open up SOME sharing functionality for free, I’d think about trying again

Horrible. Can’t do a floor plan, app crashes useless

Adsterra is the most preferred ad network for those looking for an alternative to AdSense. Adsterra is the ideal choice for new sites with low daily traffic. In order to advertise on the site in Adsterra, like other ad networks, a certain traffic limit, domain age, etc. is required. There are no strict rules. Sign up!

Lack of adequate instructions. makes this extremely annoying to try to use. I’ve watched the videos several times, gone through the written instructions twice, searched for helpful YouTube videos and tried scanning a hall at least 10 times but still don’t have it right. If you have many hours to play around with the app I bet it’s great because it seems to have many useful features. With trial and error you’ll eventually get it right. And if you’ll use it a lot figuring it out in your own like that probably is worth it. If you only want to spend a couple of hours creating a plan for your house then you may find this very frustrating.

dont waste your money. dont waste your money

Dave. Did not work at all with my new 12 pro max. I deleted the app hope I do not get charged for it.

For a paid app, it’s pretty bad.. I have tried dozens of times to try and get this app to work properly. It will never connect rooms together through the right door. And once you’re done, scanning the room, there is no way to fix the problem and tell the app which door it got wrong.it is incredibly frustrating, because you have to rescan the room every single time. I hate it.

Garbage. No sirve , basura. Te Ronan tu dinero . Garbage is totally a scam app I wish I can give 0 stars

Too Expensive for disabled hobbyist on fixed income.. The app has some bugs and isn’t always able to pick up the walls, or jumps as you attempt to select one. It is a neat app aside from the price (personal issue relative to percentage of income) and the glitches and bugs. I paid for an older version when they first appeared but it seems like (as with any company anymore) profit before function as I don’t seem to have the functionality in the current version(s) I remember having before. I only mention this because it could be a problem for anyone else on a limited or fixed income expecting the program to work as paid indefinitely. My rating is harsh but as a person with limited resources the subscription plague locks us all out of participating in a good portion of our culture or using the resources we have. The insensitivity that four dollars may be two meals for some of us (and from the looks of things a LOT more of us soon). Is it anyone’s “fault” anyone is disabled? No, not usually. But for some reason there is too large a sector of our population who doesn’t have a problem punishing us for it. We don’t deserve a living income, decent housing, nice cars (I’m not taking extravagant here), equivalent communications, or resources to give us the opportunity afforded someone who can pick up overtime, or even current technology. I have an unrealistic hope that some day I’ll have resources and have found a means of overcoming my disabilities and it is companies who have options in place for my demographic’s access to resources and tools we are otherwise locked out of who will enjoy my patronage then. If you have a fair income and adequate patience to endure the glitches and bugs, this is a helpful program that can knock a lot of the tedium of creating a floor plan out of the way. Developer: • please add a clear way to dismiss the objects window • please add RV, tiny home, and related windows, doors, toilets, lights etc. • please make the program capable of recognizing a curved wall (like the front nose of a travel trailer - this could help with repairs) • please add unusual spaces (like the inside of a pickup or car - I tried to use these apps to help design storage within the pickup I live from, and it wasn’t very helpful) • PLEASE offer an alternative to subscriptions (I’m deeply sorry Apple claims 30% no matter what if you’re a smaller developer) I’m sure some of my requests are incongruent with your original idea, but they are still within the same idea relative to measuring a space. In my case the requests would make the punishment of homelessness mildly more tolerable (assuming I can find the resources to build or have the shelves or containers fabricated). It isn’t just the materials but also the space to work on it too. Thank you.

Stupid. Instructions inadequate

Good concept poor execution and usability. I got the premium version yet, I’ve been struggling with this for hours. It would’ve been so much easier to just measure the rooms and draw them. In brick mode It says take more scans if you want more precise, however, the more precise I try to make it the more wavy it makes all the walls. Despite it thinking that a wall is ending somewhere if you try and scan to show, it’s not ending there it will give you errors & just won’t move the wall. When scanning through door openings, it will see part of another room and capture it, but then, when you do that next room and try and join them, it will treat what it saw through the opening as a separate area than the new room. It will not let you delete walls. Some walls it won’t let you even move. It seems you have one option to rotate a room right after it’s made. But once it’s incorrectly added to the drawing it seems that option is gone so I had to delete the room and re add it. They’re also doesn’t seem to be an undo in some parts while there is in other parts. The typical apple shake does not undo anything. Because of the problem I had with it correctly orienting rooms to each other. I tried just a walk-through of a whole floor as a “room”, however, that did not work because it didn’t seem to want to put doors in the middle of this room, so it would ignore the thickness of walls, I went inside new rooms. I have an open concept stairway with a vaulted ceiling, and it seemed to confuse the program. It did not like that I was trying to map the staircase and would not acknowledge that a staircase was there and draw the lines associated with it. When I came to the mid-landing instead of treating it as a staircase landing it tried to move the entire floor of the upper floor, down to the landing, and it would jostle the floor back up the second floor and then back down to the landing it couldn’t figure out what to do. In one scan, I did like 50 precise brick wall scans and at some point it misinterpreted something and the entire room outline rotated by 10° and despite moving the camera around so it could see that the room was not positioned as it was showing it it would not correct itself I had to do multiple undos in order to go back and get it to correct itself. I would think that the LIDAR would see that all these data points are there but just misaligned and just correct itself - but it didn’t. I was looking forward to using this, unfortunately, this just is not working out.

Unable to evaluate because of obnoxious self-serving pop-ups. Waste of time downloading.. Title says it all.

Pushy monetization prevents evaluation. App refuses to preform basic tasks outside of paywall, hostile design

LiDAR App. Very confusing

Greedy. Subscription model for an app like this is stupid.