NuRack Auv3 FX Processor App Reviews
NuRack Auv3 FX Processor App Description & Overview
What is nurack auv3 fx processor app? NuRack is an AUv3 based multi-channel audio and MIDI effects processor with a difference, it actually allows you to design your own custom effects using the 80+ building blocks provided. You have full control over routing which allows you to create complex audio paths in series or parallel. You can choose whether to use the stock interface or create your own custom interface using the built in Interface Builder which allows you to concentrate your audio components into a single customized effect.
NuRack can run in one of two modes. The first providing 3 customizable effects racks which can be switched (manually or via MIDI), providing seemless switching (i.e. delay trails linger whilst another set of effects are faded in). The second mode allows you to route audio through 3 independent audio racks.
A generaous number of over 80 audio and midi building blocks are provided covering 12 different categories of effects. Here are just some of those included in NuRack:
Modulation Effects: Chorus, Flanger, Phaser, Tremolo, Vocal Doubler, TalkBox, UniVibe, Leslie & Vocoder.
Time Based Effects: Stereo Delay, Tape Delay, Reverb and Reverse Delay.
Spectral Effects: Parametric EQ, Graphic EQ, PitchShift, Auto-Pan, Bit-Crusher, Tube Overdrive, Distortion, Harmony, Harmonic Exciter and SlowMo.
Dynamic Effects: VelocityControl, Compressor, Multi-Band Compressor, Noise Gate, Gate, and Limiter.
Filter Effects: MultiFilter, LP/HP Filter, Frequency Splitter, MultiBand Splitter, Classic Filters, Formant Filter, Ring Modulation and Shelf Filter.
MIDI Effects: MIDI Harmony, MIDI Velocity, MIDI Randomizer, MIDI Monitor, MIDI Mixer, MIDI Pads, MIDI Control, Strummer, MIDI Recorder, MIDI Modulation, MIDI Remap, CC Monitor, CC Generator, PitchBend, MIDI Time Clock, and ChordToMidi.
Generator Modules: Noise, Audio Clip Launcher, SoundFont Player, Virtual Flute, Virtual Clarinet, Virtual Brass, FM Organ, FM Rhodes and Analog Sawtooth Synth.
Automation: TouchPad, AutoMate, Pattern Automation, and Visual LFO.
You also provide the ability to split and combine audio signal using splitters and mixer modules as well as a number of visual elements such as VU Meters, LED Meters, Scopes, Graphs etc.
Some effects such as phaser and flanger are usually controlled by an LFO, but this can be detached and automated remotely. There are a number of modules that allow auomation based on direct touch (X/Y Pads), Visual LFO, Pattern Automation, MIDI input (CC data), or peak/rms level detection. These automation modules can remotely control knobs and sliders throughout your rack.
Simply create a new rack and start adding modules to it. These modules are generally wired up automatically but these connections can be manually routed. Once you have your sound as you wish you can use it 'as is', or switch to Interface Builder mode where you can combine all your modules into a single interface. Elements can be dragged, dropped, resized and coloured as required. Add your own labels, image logos and custom backgrounds before saving your custom component.
Use the X/Y Pad to control your modulation effects by detaching their LFO's. Use MIDI CC data to automate knobs. Use the velocity of an incoming signal to control the cutoff/resonance of a filter (wah) or volume level of a gain control (swell), as NuRack expands, so do the possibilities.
Features:
○ Over 80 categorised modules.
○ 3 Input / Output busses supported.
○ Audio & MIDI effect.
○ Lots of audio & MIDI automation options.
○ Seemless transition between racks.
○ Manual audio path routing.
○ Open in presentation mode (auto hides controls).
○ Interface Builder to customize your rack.
○ AUv3 plugin runs in MIDI and none MIDI mode.
○ Add your own Text/Heading and Image/Logos and backgrounds to your design.
○ Compatibility options for DAW's not supporting multi-channels.
○ Dark/Light Modes
Checkout the YouTube channel 'Paul the MusicMan' for demos and tutorials of NuRack.
Please wait! NuRack Auv3 FX Processor app comments loading...
NuRack Auv3 FX Processor 1.52 Tips, Tricks, Cheats and Rules
What do you think of the NuRack Auv3 FX Processor app? Can you share your complaints, experiences, or thoughts about the application with 4Pockets.com and other users?
NuRack Auv3 FX Processor 1.52 Apps Screenshots & Images
NuRack Auv3 FX Processor iphone, ipad, apple watch and apple tv screenshot images, pictures.
| Language | English |
| Price | $12.99 |
| Adult Rating | 4+ years and older |
| Current Version | 1.52 |
| Play Store | FPKT.NuRackFX |
| Compatibility | iOS 13 or later |
NuRack Auv3 FX Processor (Versiyon 1.52) Install & Download
The application NuRack Auv3 FX Processor was published in the category Music on 26 June 2020, Friday and was developed by 4Pockets.com [Developer ID: 370131860]. This program file size is 26.35 MB. This app has been rated by 42 users and has a rating of 4.7 out of 5. NuRack Auv3 FX Processor - Music app posted on 29 April 2026, Wednesday current version is 1.52 and works well on iOS 13 and higher versions. Google Play ID: FPKT.NuRackFX. Languages supported by the app:
EN Download & Install Now!| App Name | Score | Comments | Price |
| Noise Gate AUv3 Plugin Reviews | 4.5 | 4 | $5.99 |
| FontStack Reviews | 5 | 8 | $14.99 |
| Helium AUv3 MIDI Sequencer Reviews | 4.3 | 53 | $14.99 |
| MIDI Layers Reviews | 4.6 | 12 | $9.99 |
| AudioScope Reviews | 4.6 | 9 | $14.99 |
1.52 B74 Added a fix to prevent a crash when switching to Interfave Builder mode (with certain modules like strummer). The issue was caused by a function that silently failed in previous versions of iOS.
| App Name | Released |
| Music X - Best music streaming | 22 May 2016 |
| StarMaker-Sing Karaoke Songs | 05 March 2010 |
| Music Echo-Offline Music | 21 February 2025 |
| Suno - AI Songs | 01 July 2024 |
| YouTube Music | 12 November 2015 |
Find on this site the customer service details of NuRack Auv3 FX Processor. Besides contact details, the page also offers a brief overview of the digital toy company.
| App Name | Released |
| VirtualDJ Remote | 15 December 2010 |
| Solo - Fretboard Visualization | 01 January 2021 |
| Tenuto | 30 August 2011 |
| Amazing Slow Downer | 26 March 2009 |
| Koala Sampler | 28 February 2019 |
Discover how specific cryptocurrencies work — and get a bit of each crypto to try out for yourself. Coinbase is the easiest place to buy and sell cryptocurrency. Sign up and get started today.
| App Name | Released |
| 07 April 2016 | |
| BeReal. Your friends for real. | 08 January 2020 |
| Messenger | 09 August 2011 |
| Target | 24 November 2008 |
| CapCut - Video Editor | 14 April 2020 |
Install the Giftmio extension for smart shopping. Get notified about cashback opportunities, activate cashback in one click, and save money on purchases.
| App Name | Released |
| Subnautica | 08 July 2025 |
| Scritchy Scratchy | 18 March 2026 |
| Monash FODMAP Diet | 17 December 2012 |
| AnkiMobile Flashcards | 26 May 2010 |
| CloverPit | 17 December 2025 |
Each capsule is packed with pure, high-potency nootropic nutrients. No pointless additives. Just 100% natural brainpower. Third-party tested and validated by the Clean Label Project.
Adsterra is the most preferred ad network for those looking for an alternative to AdSense. Adsterra is the ideal choice for new sites with low daily traffic. In order to advertise on the site in Adsterra, like other ad networks, a certain traffic limit, domain age, etc. is required. There are no strict rules.
Keep personal info private, avoid scams, and protect yourself online with AI-powered technology.

NuRack Auv3 FX Processor Comments & Reviews 2026
Good idea. Please make it so an effect will be toggled when the x-y pad is touched. Then I can replace my Kaoss pad
Another great app from Paul - keeps getting better!. He’s a mad man! This app is fun! Use your imagination and get the usual or the unusual. It’s up to you!
Just a suggestion. I know this suggestion would represent a significant update to the developer (who is fantastic, by the way), but it would be helpful for users if it was possible to see a graphic representation of each module as a (possibly side-scrolling) list of options which could then be dragged and dropped into the effects chain, or just tapped on to add each module to the chain. Part of the problem with just seeing a text-based list of options is it’s difficult to visualize the final layout. Making the actual images visible (similar to stickers, perhaps) would drastically speed the review and selection process. Your competition (MixBox CS) has this identical issue. Scrolling through hundreds of descriptions is not as efficient for production as it would be seeing the real components.
Super cool and lots of fun!. Real nice job, Paul. Indeed not too complicated to figure out for a novice and a lot of fun to experiment around with making your own effect racks and customizing its looks. Really great stuff and definitely getting even better with every update. Thanks, kudos and five stars!
Best. Ipad 6th : Best and most fun i just love it stable and almost no bugs
Great. Great but the app keeps crashing when trying to view the coolest visualizer (the spectral analysis)
Crashes way too often. I have three simple instances of NuRackFX running in a lightly loaded AUM host. Processor load is well below 30%. Too often when I come back from a short break I’ll find that all three NuRackFX instances have red crosshatch across them and when I go to reload them, they come up empty. This happened on a 2018 iPad Pro and on a 2021 iPad pro. Interesting idea, but not reliable enough go even a casual performance IMHO. Add to that frustration the fact that the app support link goes nowhere and the 4pockets.com website is off line, and you get 2 stars.
Blown away. This app is flexible, powerful and inspiring, and the best deal out of all the ios fx apps imho, it turns my ios device into a very powerful multi effects. Wow, thank you
Can’t removed placed modules. Hope you don’t want to change any modules location or remove them after place, because it seems you can’t. Kinda breaks any utility for making complex patches as the individual modules are pretty shoddy. Unfortunately, not broken enough to be accepted for a return. Would be zero stars.
Used in every one of my projects. This app makes setting up efx so painless and keeps the Auv3 fx slots tidy and simple, setting up racks in just one instance per track where before there’d need to be a bunch of separate apps. Yet, it feels like it barely makes a dent in CPU. It’s got mostly everything, if not everything, one needs, fx wise and more, including a bunch of great MIDI tools. I love it and can’t do without at this point.
Great App for FX Mangling. This thing just keeps getting better. New modules and features galore. Also, I had a feature request and the dev implemented it in short order. Highly recommend
Please consider adding this!. Great app! Can’t wait to get in to designing some effects. One request... please add saturation! If it had that it’d be a one stop shop for drum processing! Running fuzz and overdrive in parallel, and mixing in the clean too? That’d be heaven.
Love this plugin. I’m super pleased with the in-depth and extensive capabilities and creativity that comes with this!! It’s been working great however after iOS 15 update it seems to crash all the time … help? Any thoughts?
It's as incredible as it looks. It's a brilliant idea, and it's very easy to learn how to use it. Design your own interface, and put all of your FX in one window, along with XY pads to modulate them. It's also great for cutting down on CPU usage, because you can use one app instead of many.
I wonder, ifPaul were IK Multimedia , the cost would exceed thousands. This is another super fantabulous gift from the hall of famer dev of the Ios. one of the most respected and remarkable developers, and boy did he do justice, hes gonna lay every other devs down. if you don’t buy it, you’ll definitely depart much early from the production game. Respect, 4pockets! we love you! yes we do
This is very cool.. Just starting out using the Ipad for music. I had only the free effects available on the app store, scattered across different auv3's, and of questionable quality and/or abilities. This app gives me every effect I could possibly need and the ability to customize these effects into a single rack, (or multiple racks in series and parallel). ... And, man, can you customize. It has a has a modular toolkit that lets you build all the effects you want, contained in a single effet slot. Mr. Paul knocked it out of the park again.
Did you know that you can earn 25 USD from our site just by registering? Get $25 for free by joining Payoneer!
Imagine you at your best. All the time. Picture yourself at your sharpest and most productive. Your most alert and focused. Your most lucid, creative and confident. At work. At play. In every area of your life. Add Mind Lab Pro® v4.0 to your daily routine and uncap your true potential. Buy Now!
Useless unless they move the “load/save” button from top left corner. Your “app support” link goes nowhere. I am trying to use this in algoriddim djay app, but since plugins open in windowed mode there is a permanent bar along the top that covers the “load/save” menu button that you put at the very top. That means I can’t save in-djay configurations and can’t load configurations I make directly in your app. If you move it down a little, or make a long press anywhere open the load/save menu, that would fix it. Unless you do that this effect is quite useless. Incidentally, it would be great to allow users to open any stand-alone effect they have already purchased instead of being limited to your built-in effects. I already have your multi-band compressor effect which is better than the one included here: I am basically just trying to add an equalizer on top of that. Thanks
Removing connections causes the app to crash. Other than that I’m impressed
Adsterra is the most preferred ad network for those looking for an alternative to AdSense. Adsterra is the ideal choice for new sites with low daily traffic. In order to advertise on the site in Adsterra, like other ad networks, a certain traffic limit, domain age, etc. is required. There are no strict rules. Sign up!