InstElectric Pro - Electricity Bewertung

InstElectric Pro - Electricity App Beschreibung und Prüfung

Was ist die instelectric pro - electricity-app? Tool to support the calculation of electrical installations that will allow the user (designer/electrician/technician) to perform electrical calculations easily and quickly.

· Dimensioning complete of low voltage circuits with the most frequent installation methods
· Phase cable size, neutral, protective conductor
· Criteria based on the admissible current of the cable, voltage drop and overcurrent protection
· Designation of the most used cables.
· Circuits with automatic circuit breaker until In=4000 A (Ir rating setting), maximum fuse In=1600 A (gG type), maximum 12 conductors parallel per phase, maximum size 630 mm²
· Short-circuits, including MV network, LV lines and final circuit
· Estimate of the maximum short-circuit current (simplified method)
· Maximum protected length for minimum short circuit (approximate method)
· Earthing system with diferentes types of electrodes (rods, buried conductor, rings and grid)
· Distance between the earthing systems
· Forecast of loads of a building destined to houses with several sections: dwellings, common services, commercial premises/offices and garage with/without infrastructure for recharging electric vehicles
· Reactive power of the capacitor bank for the compensation of the power factor (cos φ) and capacity (µF) of the capacitors
· C/K Factor for automatic capacitor bank
· Frequency resonance capacitors
· Compensation of the power factor for a three-phase transformer
· Choice of installation system in the function of the circuit, cable and its situation
· Overvoltage due to defects to earth in medium voltage MV depending on the earthing systems
· Power in an unbalanced three-phase system
· Overvoltages due to loss of neutral conductor, earth fault and short circuit
· Electricity parameters of a single-phase or three-phase (balanced)
· Transformer performance
· Secondary voltage of a transformer acoording to switch position
· Distribution of load of transformers in parallel
· K-Factor transformer
· Current transformer
· Verification resistance of the assembly to short-circuits
· Dissipated power of a assembly
· Size of trays and conduits
· Conduits characteristics according to the installation method
· Conversions of wire sizes (mm²-awg) and conduits threads
· Impedance, resistance and reactance of a cable
· Representation of the curves of the protections
· International protection IP - IK

Parameter settings for calculations:
· Constants (voltages, conductivity, temperatures, etc.) that affect electrical calculations
· Protections (circuit breakers and fuses)
· Selection of minimum rate for circuit-breakers with regulation and maximum cable size for multi-conductor grouping per phase
· Method estimation of the reactance
· Conductivity of the conductor depending on the current of the circuit (constant, according to the expected current, maximum cable temperature)
· Use reduction factors by grouping cables/circuits
· Use of factors of diversity/utilization

· Reference documents: IEC Standards, REBT (sp), Technical Application Guide, (UE) 2016/364

IN NO CASE SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT OR INDIRECT DAMAGES AS A RESULT OF THE CORRECT OR INCORRECT USE OF THE APPLICATION

👋 Wenn dir die InstElectric Pro - Electricity anwendung gefällt, kannst du sie dann mit deinen freunden teilen?

Kommentare zu den Noten InstElectric Pro - Electricity

InstElectric Pro - Electricity Kundendienst

Was halten Sie von der InstElectric Pro - Electricity-App? Können Sie Ihre Beschwerden, Erfahrungen oder Gedanken zur Anwendung mit dem Unternehmen und den Mitarbeitern von Angel Martinez teilen?

InstElectric Pro - Electricity Apps Bilder und Bildschirmfoto

InstElectric Pro - Electricity app iphone, ipad, apple watch ve apple tv app bilder.

InstElectric Pro - Electricity (Version 3.0.2) Anwendung Herunterladen und Installieren

Die Applikation InstElectric Pro - Electricity wurde am Freitag, 4. Januar 2019 in der kategorie Produktivität veröffentlicht und von Angel Martinez [Developer ID: 1446956865] entwickelt. Diese anwendungsdatei hat eine größe von 15.3 MB. Diese App wurde von 1 Benutzern bewertet und hat eine Bewertung von 4,0 von 5. Die neueste auf Donnerstag, 22. Januar 2026 veröffentlichte Version von InstElectric Pro - Electricity ist 3.0.2. Es funktioniert problemlos auf feräten mit mindestens IOS 16.0 und höher. ID-Nummer des Google Play Store: com.xlingenieria.i.instelectric.pro. Von der App unterstützte Sprachen: