Piper Warrior II

Piper Warrior II App Description et Analyse

Qu'est-ce que l'application Piper Warrior II? Gyronimo Performance Pad Piper PA 28-161 -Warrior II-
The ultimate computer for Mass & Balance and Performance for all
Warrior II models with 2440lbs max GW.

***** now with 0º and 25º Flaps takeoff computations *****



Calculate and interpolate performance data using the actual values
from the Warrior II Pilot's Operating Handbook (POH).


Finish your complete fight planning in just a few seconds.
Performance planning has never been easier and quicker.

Results are updated immediately and displayed in high resolution graphics,
enhanced for the iPad 2, iPad Retina and iPad Mini.


Change all important values using sliders.
Experiment with the results and create "what if" scenarios in no time.


Find your optimal cruise altitude, takeoff ground roll, landing distance,
climb data and stall speeds.

The Performance Pad Warrior II has seven main pages:

1. The Mass & Balance (or Weight & Balance) Page
Calculates Center of Gravity, Moments, Takeoff and Zero Fuel Mass as well as Percent MAC (% MAC).



2. The Takeoff Page
Using the actual data from the C172G "Rocket" Operating Handbook
the Performance Pad calculates and displays Ground Roll and Landing Distance
based on:

- Aircraft Mass
- Takeoff Elevation in MSL (Pressure Altitude and Density Altitude will be computed)
- Outside Air Temperature (OAT)
- Altimeter Setting
- Runway Conditions (i.e. paved dry to long grass or snow)
- Runway Slope
- Wind Conditions



3. The Climb page
Calculates time, fuel and distance based on
- Difference between Takeoff Elevation and intended Flight Level
- Altimeter Setting
- Outside Air Temperature (OAT)
- Altimeter Setting
- Headwind or Tailwind Component

Also the Rate of Climb and Climb Speed will be displayed.


4. The Cruise Page
Using the actual data from the Pilot's Operating Handbook you can
determine the optimal cruise altitude based on
- Trip Distance
- Flight Level
- Engine RPM
- Temperature
- Wind and Altimeter Setting



5. Landing Page
Calculates Ground Roll and Landing Distance based on wind, elevation, altimeter setting etc.
Like on the Takeoff Page you can use the Wind Components Computer to quickly determine head- or tailwind components

6. Stall Speed Page.
Calculates The Stall Speed based on Bank Angle and Flap Settings.
Stall Speed will be computed as KIAS and KCAS using the actual values from the POH.

7. Setup
- Load and Save up to five Aircraft Settings and Scenarios.
- Send a Mass & Balance Summary to your email address.
- Visit our video channel and watch tutorials and video manuals.

Mode Switch:

The Performance Pad can be used in two Modes:

"Individual Mode"
All calculations can be done independently from each other.

"Plan Mode"
Calculated values will be forwarded to the next page and an additional "Flight Summary Page" is
available. Choose this mode if you want to do a complete performance planning.



The author disclaims any liability for any direct, indirect, incidental, or consequential losses or damages in connection with your access to or use of this software. The information contained in this software is for general information purposes only.

👋 Si vous aimez l'application Piper Warrior II, pouvez-vous la partager avec vos amis?

Piper Warrior II Commentaires et Critiques (2026)

Piper Warrior II Client de Service

Que pensez-vous de l'application Piper Warrior II? Pouvez-vous partager vos plaintes, expériences ou réflexions sur l'application avec Gyronimo, LLC et les autres?

Piper Warrior II Apps Captures D'écran et Images

Piper Warrior II iphone, ipad, apple watch ve apple tv images d'application.

Installation et Téléchargement de l'application Piper Warrior II (Version 1.7)

L'application Piper Warrior II ios a été développée par Gyronimo, LLC [ID développeur: 536898885] et est sortie dans la catégorie Éducation le jeudi 9 juillet 2015. La taille du fichier de l'application est de 36.81 MB. Cette application a été évaluée par 16 utilisateurs et a une note de 1 sur 5. La dernière version de Piper Warrior II publiée le mercredi vendredi 13 juillet 2018 est la 1.7. Le logiciel IOS 9.1 et supérieur fonctionne correctement. Google Play ID: com.gyronimosystems.PA28WarriorII. Langues prises en charge par l'application: