ElectriCalc Pro

ElectriCalc Pro Uygulama İncelemesi

ElectriCalc Pro uygulaması nedir, nasıl kullanılır? The official US-based National Electrical Code® (NEC) ElectriCalc® Pro from Calculated Industries for iOS is a full-featured emulation of our popular #5065/#5070 models.

And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.

In addition to built-in help, the ElectriCalc Pro electrical code calculator is fully compliant with 2023, 2020, 2017, 2014, 2011, 2008, 2005, 2002, 1999, and 1996 NEC®.

Electrical Contractors, Designers, Electricians and Lighting Specialists solve tough electrical calculations in seconds and deliver those solutions in conformance with the latest NEC®.

The ElectriCalc Pro is a complete electrical reference tool that will save time, trouble and money.

FEATURES:
•All the functionality and solutions of the handheld ElectriCalc Pro calculator and optimized for the iPhone/iPod Touch user
•Built-in help – just press and hold the desired key for full, clear definitions, explanations and examples of keystrokes
•A complete User’s Guide is available free at (go to ElectriCalc Pro support link below)
•Swipe left to right to edit an entry (backspace)

ElectriCalc Pro Solutions:
•Wire Sizes
•Voltage Drop
•Conduit Sizing
•Motor Full-Load Amps
•Fuse and Breaker Sizes
•NEC® Table Number displayed when performing Wire Size calculations
•Service and Equipment Grounding Conductor Sizes
•Enter BTU to find Kilowatts per Hour
•Enter Kilowatts per Hour to find BTU
•Parallel Resistance
•Ohm’s Law Calculations – enter any two values to solve for the third
•Circular MILS wire sizes
Description of ElectriCalc Pro Calculations:
•Work directly in and convert between Amps, Watts, Volts, Volt-Amps, kVA, kW, PF% and EFF% and DC Resistance
•Calculate wire sizes per NEC® 310-16 and 310-17; Copper or aluminum, 3Ø/1Ø, 60°C, 75°C, 90°C insulation ratings and 100% or 125% of ampacity. Can also adjust wire sizes for ambient temperatures other than 30◦ C and for more than three wires in a raceway
•Integrated voltage drop solutions. Find minimum VD wire size, maximum Length for any given wire size, drop percentage, actual number and percentage of Volts dropped
•Conduit sizing for 12 types of conduit. Per 2005 and 2008 NEC® Table C1-C12, find sizing of all common conduits for any combination for #THW, #XHHW and # THHN wires. Plus, gives fill percentages, cross-sectional areas, remaining areas and more
•Find Motor Full-Load Amps per current NEC®. Works in 1Ø and 3Ø with the new expanded tables for 3Ø induction (to 500 hp) synchronous (to 200 hp) and DC motors per NEC® 430-247, 430- 248 and 430-250.
•Calculates Fuse and Breaker Sizes. Solves fuse and breaker sizes per NEC® 430-52
•Parallel and derated wire sizing
•Parallel Resistance
•NEC Table number displays when performing Wire Size calculations
•Sizes overload protection per NEC® 430-32
•Automatically finds NEMA starter sizes.
•Calculates service and equipment grounding conductor sizes per NEC® 250-122 and 250-66; plus works directly in electrical terms.
•Enter BTU to find Kilowatts per Hour
•Enter Kilowatts per Hour to find BTU
•Ohm’s Law Calculations – enter any two values to solve for the third.
•Enter, solve or convert to Circular MILS wire sizes

Note: Electrical math is universal, however, code-based sizing solutions are based on the US National Electrical Code® (NEC); users in other countries should check with their local Code Officials for applicability.

TRADEMARKS:
ElectriCalc® is a registered trademark of Calculated Industries, Inc.

👋 ElectriCalc Pro aplikasyonunu beğendiyseniz arkadaşlarınızla paylaşır mısınız?

ElectriCalc Pro Hakkındaki Yorumlar

ElectriCalc Pro Müşteri Hizmetleri

ElectriCalc Pro aplikasyonu hakkında ne düşünüyorsunuz? Uygulama hakkındaki şikayet, deneyim veya düşüncelerinizi Calculated Industries şirketi ve insanlarla paylaşır mısınız?

ElectriCalc Pro Uygulaması Ekran Görüntüleri & Resimleri

ElectriCalc Pro uygulaması iphone, ipad, apple watch ve apple tv aplikasyon görüntüleri.

ElectriCalc Pro (Versiyon 10.6.1) Aplikasyonu İndir & Yükle

ElectriCalc Pro ios uygulaması Calculated Industries [Geliştirici ID: 370406449] tarafından geliştirilip, 20 Ekim 2012 Cumartesi günü Yardımcılar kategorisinde yayınlanmıştır. Aplikasyonun dosya boyutu 24.1 MB'tır. Bu uygulama 15 kullanıcı tarafından oylanmış ve 5 üzerinden 1 puan almıştır. ElectriCalc Pro programının 7 Haziran 2023 Çarşamba günü yayınlanan son sürümü 10.6.1 versiyonudur. Minumum IOS 11.0 ve üzeri cihazlarda sorunsuz olarak çalışmaktadır. Google Play Store ID numarası: com.calculated.carmencita5065. Uygulamanın desteklediği diller şunlardır:
EN Uygulamayı İndir & Yükle!